Mark Safety Appliances

Disposable protective clothing protecting against carriers in the form of particles and liquid chemical splash

Product Description:

• Line Single Use
• Brand Honeywell
• Automotive, Construction, Chemical Industries, Energy, General Industry, Glass Industries, Industrial
• cleaning, Laboratories, Maintenance, Medical and pharmaceutical industry, Offshore, Petrochemicals

Features & Benefits

• Features The HCL561/62 is antistatic and does not contain light weight
• VERSATALITY- Certification type 5 & 6
• ERGONOMICS & COMFORT- Specially designed crotch area provides better resistance to tearing during bending
• HIGH PROTECTION- Protection flaps - Fingerloop ensures sleeve movement is limited providing protection at all times

Technical Description

• Description: HCL561/62 is a Category 3 certified Type 5 & 6 , antistatic suit resistant to particles, radioactive and
• biological agents. The hood, wrists and ankles are elastic. It is made of white polypropylene nonwoven and contains neither silicone nor latex
• *Attention: Does not protect against radiation
• *Additional Information: Please refer User Guide
• Sex: Unisex
• Size S to XXXL
• Correlation Table Table size
• Material Polypropylene nonwoven laminate with a microporous polyethylene nonwoven layer
• Limitations of Use: Do not use the product during the following: defective closure, seams open or any other defects that may appear visible
• Colour White
• Type of Protection:• 5 • 6
• Warning: The employer must first identify and assess the risks associated with the operation and check if the selected PPE meets requirements.

Maintenance

• Life cycle:Disposable item . Dispose after use. Do not reuse clothing.
• Storage Information: Store - 10 ° to + 40 ° C and kept in the original packaging , the product maintains its properties intact for 3 years.
• Care Instructions: Do not reuse clothing

Certifications

• EC Category PPE: 3
• EC Certificate Number CE 1556240163 -00 -00

Unlined Nitrile Long Industrial Gloves (18" 22 Mil)

Product Description:

• Material:Nitrlie
• Size (Inches) : 18"
• Nature :Unlined
• Length/mm : 462+ /-4 
• Thickness/mm: 1.16 + /- 0.03
• Size :  9/10
• Color : Green
• Chlorination : Yes
• Weight : 160 to 170 gm
• Silicon, wax and Protein free
• Reusable and water proof

Product Description:

A Telescopic Discharge Rod is a residual static charge grounding device used primarily in the electrical applications to safely discharge residual electrical energy from high-voltage equipment, such as transformers, capacitors, or power lines, before maintenance or inspection work.

Components: Discharge rod + single-phase ground wire + grounding clamp.

Discharging Stored Energy:

• High-voltage equipment can store electrical energy even after being disconnected from the power supply. The telescopic discharge rod safely discharges this residual energy, preventing accidental electrical shocks.

Ensuring Safety During Maintenance:

• Before maintenance work begins, the rod is used to discharge any remaining voltage in the equipment, ensuring that the work environment is safe for technicians and electricians.

How its Works:

1. Telescopic Design:
The rod design is extendable. allowing it to reach equipment that is located high off the
ground. This extendable or telescopic feature enables safe operation from a distance,
reducing the risk to the operator.
2. Insulated Material:
The rod is made from insulating materials (like fiberglass) to ensure that the operator is not
exposed to any potential electrical hazards.
3. Discharge Process:
The Discharge Rod is connected to a grounding point. The operator then connects the rod to
the high-voltage equipment. The rod safely discharges any residual voltage by allowing the
current to flow harmlessly to the ground.

Safety Precautions:

1. Proper Training
Operators should be trained in the correct use of the discharge rod to avoid improper handling, which can lead to accidents.
2. Inspection
The rod should be inspected regularly for damage or wear that could compromise its insulating properties.
3. Grounding
Always ensure that the rod is properly grounded before use to effectively discharge any residual voltage.
4. PPE Usage
Proper PPE such as Insulating gloves/Footwear, Arc Flash Clothing, Arc Flash Faceshield and non contact voltage detector
should be used while doing discharging process with discharge rod.

Features & Benefits:

• Textured hexagonal design for the better grip.
• Foam filled FRP stick for superior electrical insulation.
• TPE Coated Copper Cable with voltage range upto 1100V.
• High Grade aluminium clamp for efficient discharge of volta ge.
• Cross dimensional yarn used for the better mechanical strength.
• Vinylester resin FRP tube, which provides better mechanical & electrical insulation properties.
• Heavy duty jaw type grounding clamp rated for 600V.
• Tested in General accordance with of IEC 60060-1/2010(CPRI) – 110KV & ASTM F711.

Standards:

1. IEC 60060-1/2010 (CPRI)

• Artificial Pollution Test.
• Dry Power Frequency withstand voltage test up to 110 KV for 1 minute.
• Assured disruptive discharge voltage tests.
• Switching Impulse Test: Switching Impulse test at a Voltage of 110 KV.

2. ASTM F711

• Crush Test
• Load Test
• Flexure Test
• Wicking Test

Easy dissembled for easy cleaning and maintenance

Typical Discharge Time:

For most applications, the discharge time is typically a few seconds, ranging from 5 to 60 seconds, and it depends on various
factors. Some high-capacitance equipment may require longer discharge times. To verify that discharging is complete
Non-Contact Voltage detectors should be used.

WARNING : DISCHARGE STICKS ARE NOT GROUNDING TOOLS AS
DESCRIBED BY OSHA 1910.269 AND CARRY NO FAULT DUTY RATING.

Product Description:

Raychem RPG – Kamfet KL-B Series - Class 4 Electrical Insulating Gloves. 
Ergonomically designed natural rubber insulating gloves for all-day safety and comfort. 
Ultimate fit, comfort, and performance for Electrical worker's safety and protection.

• ASTM F2675 ARLim 39 cal/cm2*
• Product Technology: Dipped, Seamless, Powder-Free Gloves
• Glove color: Red
• Category: RC
• Length: 41 cm.
• Thickness: 4.2 MM
• Size Available: 9 to 12
• Cuff Design: Straight Cuff, Cut Edge 

Working Voltage:

• AC = 36000 V
• DC = 54000V
• Test voltage (V) AC = 40000 V

Description:

• CE Category: III Irreversible risks *In accordance with standards:
• EN  60903-2003
• IEC 60903-2014

Fiberglass Extension Ladder (20 Feet)

Product Description:

• Total Length: 20'
• Length of Section:10'
• Exten. Height:17'
• Approx Wt: 23
• Apprx. Cube:9.54'
• Round Fully Serreted Tempered Rungs: Rungs are directly riveted on the side rails.
• Easy locking system: Rope operated.
• Safety Shoe: Thick Rubber Shoe.
• Full Channel Fiberglass Channel: Nonconductive

Cryogenic Kit (Liquid Nitrogen Cryogenic Protective)

Product Description:

• Customization: Available
• Type: Whole Body Protection
• Material: Cryogenic Cotton

PROTECTION SCOPE

• This glove meets the essential requirements of the Personal Protective Equipment Regulation 2016/425.
• This glove is designed against mechanical risks, cold risks.
• It is a category II product.

Standard EN ISO 21420 : 2020

Advanced Chemical Barrier and Flame Resistance coverall

Product Description:

• Advanced Chemical Barrier and Flame Resistance coverall;
• Outer high barrier FR film laminated to proprietary non-woven substrate of viscose rayon to create a chemical barrier fabric with FR properties;
• Coverall with Tape sealed seams, Double storm flap with hook and loop closure, Elasticated hood, waist, cuffs and ankles; Blue Colour
• LAKELAND Pyrolon™ CBFR-Coverall with hood,single zip,double velcro storm flap,elasticated cuff and ankle.
• Stitched / Taped seams for full seal
• Single zip and doubled storm flap front fastening with hook and loop seals enabling re-use where appropriate.
• Coverall with hood,elasticated cuffs,waist and ankles.Double layer,cushioned kneepads for comfort and durability.
• CE Certification: TYPE 3; TYPE 4; TYPE 5; TYPE 6; EN14116; EN1149

Gum boot with Steel Toe

Product Description:

Double Injection Moulded PVC Gumboot (Made by Fully Computerized Imported Machine)

• Style : Gumboot / Knee Boot
• Size : 5 to 11 (39 to 45)
• Height : 14" + /-0.5"
• Upper : Soft PVC
• Sole : Hard PVC
• Inner Lining : Heavy Cotton Lining
• Toe : With Steel Toe Cap
• Colour : Black Brown

Latex double layer - Fully coated - Flocked, Thickness : 0,60 mm , Length : 300 mm

Product specifications:

• Glove family : Tight glove unsupported flocked - Tight glove unsupported flocked
• Glove kind : Tight glove
• Tight glove kind : Unsupported
• Inner finition : Flocked
• Coating material and finition : Latex double layer
• Coating level : Fully coated
• Number of layer : Double Layer
• Arm level protection : Forearm cuff (< 400mm)
• Thickness (mm) : 0,60
• Thickness (inch) : 0.0236
• Size : 6 - 7 - 8 - 9 - 10
• Color : Blue-Yellow
• Type of packaging : in individual bags
• Coating finition : Grip-textured - double-layer